1. Visual Inspection
Each pump is examined for external damage, cracks, and signs of wear on the body and components. Cosmetic issues and potential safety concerns are noted for further action.
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
Refurbished CareFusion Alaris Medley Module PCU 8015 (4.7" Screen) Rental
Refurbished • Rental • Model 8015 • 4.7-Inch Small-Screen PC Unit • 1-Year Warranty
The CareFusion Alaris PC Unit Model 8015 is the central control, power, and communications component of the modular Alaris System. This rental listing is specifically for the 4.7-inch diagonal small-screen variant. Compatible infusion and monitoring modules attach to the PC Unit through its Inter-Unit Interface connectors and are programmed and monitored through the shared Alaris user interface.
Rental configuration note: United Infusion confirms the 8015 PC Unit rental but does not separately identify the installed software version, wireless-network card, attached infusion modules, power cord, battery revision, or other accessories for every rental unit. Confirm the complete configuration, software version, included accessories, and module requirements before deployment.
The Alaris PC Unit Model 8015 serves as the core of the modular Alaris System. It provides the common user interface used to program and monitor compatible attached modules and supplies power and communications through the system's Inter-Unit Interface connectors.
Manufacturer documentation supports configurations with up to four detachable infusion and/or monitoring modules. Compatible V9-platform documentation includes the Alaris Pump Module Model 8100, Syringe Module Model 8110, PCA Module Model 8120, SpO2 Modules Models 8210 and 8220, EtCO2 Module Model 8300, and Auto-ID Module Model 8600. The Auto-ID Module may be included as an additional fifth module where supported.
The PC Unit works with Guardrails Suite MX and facility-configured Data Sets, Drug Libraries, Profiles, Clinical Advisories, and system configurations. Wireless communication with supported Alaris system infrastructure is available when the PC Unit contains a compatible wireless network card and is properly configured for the facility's network.
PCU versus infusion-module note: The Model 8015 PC Unit is the system controller and is not itself a fluid-delivery channel. Flow-rate, bolus, occlusion, air-in-line, and other delivery-performance specifications belong to the applicable attached infusion module. A delivery-rate range should therefore not be assigned to the standalone 8015 PC Unit.
Software note: The supplied PartsSource reference identifies one 4.7-inch configuration with Software Version 9.33. United Infusion's current rental listing does not confirm Software 9.33 for every available unit, and its existing download link points to a Software v9.19 manual. Verify the installed software version on the individual rental PC Unit before use and use documentation that matches that software version.
Rental note: United Infusion lists the unit as refurbished rental-ready equipment and states that rental pumps are tested, serviced, maintained, and cleaned before delivery. Short- and long-term rental options, support, and replacement service are available subject to the applicable rental agreement.
Current safety note: FDA currently lists open recalls and corrections involving the Alaris PC Unit Model 8015. These include Class II Recall Z-1645-2026 for the BD Alaris System with Point-of-Care Unit, Class II Recall Z-3138-2024 involving affected Model 8015 units or components with potentially bent female IUI connector contacts, and Class I Recall Z-2909-2020 involving PC Units manufactured from April 7, 2017 onward with potentially unresponsive or stuck keypad keys related to fluid ingress. Applicability depends on the individual unit's manufacture date, serial number, hardware, repair history, and configuration. Verify the rental unit against current BD and FDA information before clinical deployment.
| Manufacturer Documentation | CareFusion 303, Inc. / BD |
| Seller-Listed Brand | Alaris |
| Model | 8015 |
| Product Type | Point-of-Care Unit / modular infusion-system controller rental |
| Condition | Refurbished |
| Display Variant | 4.7-inch diagonal small-screen PCU |
| Installed Software | Not specified on the current United Infusion rental listing; verify the individual PC Unit |
| PartsSource Reference Configuration | 4.7-inch Model 8015 with Software 9.33; reference configuration only, not confirmation of United Infusion rental software |
| System Role | Central user interface, power supply, and communications controller for compatible Alaris modules |
| Attached Module Capacity | Up to four detachable infusion and/or monitoring modules; Auto-ID can be included as an additional fifth module in supported configurations |
| Documented V9 Module Family | 8100 Pump • 8110 Syringe • 8120 PCA • 8210/8220 SpO2 • 8300 EtCO2 • 8600 Auto-ID |
| Flow Rate | Not applicable to the standalone PC Unit; determined by the attached infusion module |
| Dimensions | 6.9 in W × 8.8 in H × 9 in D, including pole clamp |
| PC Unit Weight | 7.2 lb |
| Power Requirements | 100–240 VAC • 50/60 Hz • 150 VA maximum |
| Battery | 12 V, 4000 mAh rechargeable nickel-metal hydride (NiMH), per v9.33 manufacturer manual |
| Published Battery Runtime — 1 Pump Module | Approximately 6 hours with one Pump Module infusing at 25 mL/hr using a new, fully charged battery |
| Published Battery Runtime — 4 Pump Modules | Approximately 3 hours with four Pump Modules infusing at 25 mL/hr using a new, fully charged battery |
| High-Load Published Runtime | Approximately 1 hour with four Pump Modules infusing at 999 mL/hr plus one Auto-ID Module |
| Battery Recharge | Approximately 16 hours for a depleted battery, per manufacturer instructions |
| Battery Runtime Note | Runtime varies with number and type of modules, module activity, battery condition, and configuration |
| Communication Data Port | RS-232 with RJ45 connector |
| Module Interface | Left and right Inter-Unit Interface (IUI) connectors |
| Wireless Connectivity | Supported when compatible wireless-network hardware is installed and properly configured |
| Electronic Memory | Compact flash storage for system software and Data Set information plus onboard nonvolatile flash memory for logs and related system data |
| Fluid Ingress Protection | IPX2 — drip proof |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Operating Relative Humidity | 20% to 90% noncondensing |
| Operating Orientation | Manufacturer specifies that the Alaris System remain upright during operation |
| Seller Warranty | 1-Year Warranty |
| Rental Options | Short- and long-term options available; final configuration and terms confirmed by quote |
The exact software version installed on the rental PC Unit should be verified before selecting version-specific instructions. BD's current PC Unit product page and official Software v9.33 Model 8015 manual are provided below, together with current FDA PCU safety records.
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
Refurbished CareFusion Alaris Medley Module PCU 8015 (4.7" Screen) Rental
Refurbished • Rental • Model 8015 • 4.7-Inch Small-Screen PC Unit • 1-Year Warranty
The CareFusion Alaris PC Unit Model 8015 is the central control, power, and communications component of the modular Alaris System. This rental listing is specifically for the 4.7-inch diagonal small-screen variant. Compatible infusion and monitoring modules attach to the PC Unit through its Inter-Unit Interface connectors and are programmed and monitored through the shared Alaris user interface.
Rental configuration note: United Infusion confirms the 8015 PC Unit rental but does not separately identify the installed software version, wireless-network card, attached infusion modules, power cord, battery revision, or other accessories for every rental unit. Confirm the complete configuration, software version, included accessories, and module requirements before deployment.
The Alaris PC Unit Model 8015 serves as the core of the modular Alaris System. It provides the common user interface used to program and monitor compatible attached modules and supplies power and communications through the system's Inter-Unit Interface connectors.
Manufacturer documentation supports configurations with up to four detachable infusion and/or monitoring modules. Compatible V9-platform documentation includes the Alaris Pump Module Model 8100, Syringe Module Model 8110, PCA Module Model 8120, SpO2 Modules Models 8210 and 8220, EtCO2 Module Model 8300, and Auto-ID Module Model 8600. The Auto-ID Module may be included as an additional fifth module where supported.
The PC Unit works with Guardrails Suite MX and facility-configured Data Sets, Drug Libraries, Profiles, Clinical Advisories, and system configurations. Wireless communication with supported Alaris system infrastructure is available when the PC Unit contains a compatible wireless network card and is properly configured for the facility's network.
PCU versus infusion-module note: The Model 8015 PC Unit is the system controller and is not itself a fluid-delivery channel. Flow-rate, bolus, occlusion, air-in-line, and other delivery-performance specifications belong to the applicable attached infusion module. A delivery-rate range should therefore not be assigned to the standalone 8015 PC Unit.
Software note: The supplied PartsSource reference identifies one 4.7-inch configuration with Software Version 9.33. United Infusion's current rental listing does not confirm Software 9.33 for every available unit, and its existing download link points to a Software v9.19 manual. Verify the installed software version on the individual rental PC Unit before use and use documentation that matches that software version.
Rental note: United Infusion lists the unit as refurbished rental-ready equipment and states that rental pumps are tested, serviced, maintained, and cleaned before delivery. Short- and long-term rental options, support, and replacement service are available subject to the applicable rental agreement.
Current safety note: FDA currently lists open recalls and corrections involving the Alaris PC Unit Model 8015. These include Class II Recall Z-1645-2026 for the BD Alaris System with Point-of-Care Unit, Class II Recall Z-3138-2024 involving affected Model 8015 units or components with potentially bent female IUI connector contacts, and Class I Recall Z-2909-2020 involving PC Units manufactured from April 7, 2017 onward with potentially unresponsive or stuck keypad keys related to fluid ingress. Applicability depends on the individual unit's manufacture date, serial number, hardware, repair history, and configuration. Verify the rental unit against current BD and FDA information before clinical deployment.
| Manufacturer Documentation | CareFusion 303, Inc. / BD |
| Seller-Listed Brand | Alaris |
| Model | 8015 |
| Product Type | Point-of-Care Unit / modular infusion-system controller rental |
| Condition | Refurbished |
| Display Variant | 4.7-inch diagonal small-screen PCU |
| Installed Software | Not specified on the current United Infusion rental listing; verify the individual PC Unit |
| PartsSource Reference Configuration | 4.7-inch Model 8015 with Software 9.33; reference configuration only, not confirmation of United Infusion rental software |
| System Role | Central user interface, power supply, and communications controller for compatible Alaris modules |
| Attached Module Capacity | Up to four detachable infusion and/or monitoring modules; Auto-ID can be included as an additional fifth module in supported configurations |
| Documented V9 Module Family | 8100 Pump • 8110 Syringe • 8120 PCA • 8210/8220 SpO2 • 8300 EtCO2 • 8600 Auto-ID |
| Flow Rate | Not applicable to the standalone PC Unit; determined by the attached infusion module |
| Dimensions | 6.9 in W × 8.8 in H × 9 in D, including pole clamp |
| PC Unit Weight | 7.2 lb |
| Power Requirements | 100–240 VAC • 50/60 Hz • 150 VA maximum |
| Battery | 12 V, 4000 mAh rechargeable nickel-metal hydride (NiMH), per v9.33 manufacturer manual |
| Published Battery Runtime — 1 Pump Module | Approximately 6 hours with one Pump Module infusing at 25 mL/hr using a new, fully charged battery |
| Published Battery Runtime — 4 Pump Modules | Approximately 3 hours with four Pump Modules infusing at 25 mL/hr using a new, fully charged battery |
| High-Load Published Runtime | Approximately 1 hour with four Pump Modules infusing at 999 mL/hr plus one Auto-ID Module |
| Battery Recharge | Approximately 16 hours for a depleted battery, per manufacturer instructions |
| Battery Runtime Note | Runtime varies with number and type of modules, module activity, battery condition, and configuration |
| Communication Data Port | RS-232 with RJ45 connector |
| Module Interface | Left and right Inter-Unit Interface (IUI) connectors |
| Wireless Connectivity | Supported when compatible wireless-network hardware is installed and properly configured |
| Electronic Memory | Compact flash storage for system software and Data Set information plus onboard nonvolatile flash memory for logs and related system data |
| Fluid Ingress Protection | IPX2 — drip proof |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Operating Relative Humidity | 20% to 90% noncondensing |
| Operating Orientation | Manufacturer specifies that the Alaris System remain upright during operation |
| Seller Warranty | 1-Year Warranty |
| Rental Options | Short- and long-term options available; final configuration and terms confirmed by quote |
The exact software version installed on the rental PC Unit should be verified before selecting version-specific instructions. BD's current PC Unit product page and official Software v9.33 Model 8015 manual are provided below, together with current FDA PCU safety records.
Refurbished CareFusion Alaris Medley Module PCU 8015 (4.7" Screen) Rental
Refurbished • Rental • Model 8015 • 4.7-Inch Small-Screen PC Unit • 1-Year Warranty
The CareFusion Alaris PC Unit Model 8015 is the central control, power, and communications component of the modular Alaris System. This rental listing is specifically for the 4.7-inch diagonal small-screen variant. Compatible infusion and monitoring modules attach to the PC Unit through its Inter-Unit Interface connectors and are programmed and monitored through the shared Alaris user interface.
Rental configuration note: United Infusion confirms the 8015 PC Unit rental but does not separately identify the installed software version, wireless-network card, attached infusion modules, power cord, battery revision, or other accessories for every rental unit. Confirm the complete configuration, software version, included accessories, and module requirements before deployment.
The Alaris PC Unit Model 8015 serves as the core of the modular Alaris System. It provides the common user interface used to program and monitor compatible attached modules and supplies power and communications through the system's Inter-Unit Interface connectors.
Manufacturer documentation supports configurations with up to four detachable infusion and/or monitoring modules. Compatible V9-platform documentation includes the Alaris Pump Module Model 8100, Syringe Module Model 8110, PCA Module Model 8120, SpO2 Modules Models 8210 and 8220, EtCO2 Module Model 8300, and Auto-ID Module Model 8600. The Auto-ID Module may be included as an additional fifth module where supported.
The PC Unit works with Guardrails Suite MX and facility-configured Data Sets, Drug Libraries, Profiles, Clinical Advisories, and system configurations. Wireless communication with supported Alaris system infrastructure is available when the PC Unit contains a compatible wireless network card and is properly configured for the facility's network.
PCU versus infusion-module note: The Model 8015 PC Unit is the system controller and is not itself a fluid-delivery channel. Flow-rate, bolus, occlusion, air-in-line, and other delivery-performance specifications belong to the applicable attached infusion module. A delivery-rate range should therefore not be assigned to the standalone 8015 PC Unit.
Software note: The supplied PartsSource reference identifies one 4.7-inch configuration with Software Version 9.33. United Infusion's current rental listing does not confirm Software 9.33 for every available unit, and its existing download link points to a Software v9.19 manual. Verify the installed software version on the individual rental PC Unit before use and use documentation that matches that software version.
Rental note: United Infusion lists the unit as refurbished rental-ready equipment and states that rental pumps are tested, serviced, maintained, and cleaned before delivery. Short- and long-term rental options, support, and replacement service are available subject to the applicable rental agreement.
Current safety note: FDA currently lists open recalls and corrections involving the Alaris PC Unit Model 8015. These include Class II Recall Z-1645-2026 for the BD Alaris System with Point-of-Care Unit, Class II Recall Z-3138-2024 involving affected Model 8015 units or components with potentially bent female IUI connector contacts, and Class I Recall Z-2909-2020 involving PC Units manufactured from April 7, 2017 onward with potentially unresponsive or stuck keypad keys related to fluid ingress. Applicability depends on the individual unit's manufacture date, serial number, hardware, repair history, and configuration. Verify the rental unit against current BD and FDA information before clinical deployment.
| Manufacturer Documentation | CareFusion 303, Inc. / BD |
| Seller-Listed Brand | Alaris |
| Model | 8015 |
| Product Type | Point-of-Care Unit / modular infusion-system controller rental |
| Condition | Refurbished |
| Display Variant | 4.7-inch diagonal small-screen PCU |
| Installed Software | Not specified on the current United Infusion rental listing; verify the individual PC Unit |
| PartsSource Reference Configuration | 4.7-inch Model 8015 with Software 9.33; reference configuration only, not confirmation of United Infusion rental software |
| System Role | Central user interface, power supply, and communications controller for compatible Alaris modules |
| Attached Module Capacity | Up to four detachable infusion and/or monitoring modules; Auto-ID can be included as an additional fifth module in supported configurations |
| Documented V9 Module Family | 8100 Pump • 8110 Syringe • 8120 PCA • 8210/8220 SpO2 • 8300 EtCO2 • 8600 Auto-ID |
| Flow Rate | Not applicable to the standalone PC Unit; determined by the attached infusion module |
| Dimensions | 6.9 in W × 8.8 in H × 9 in D, including pole clamp |
| PC Unit Weight | 7.2 lb |
| Power Requirements | 100–240 VAC • 50/60 Hz • 150 VA maximum |
| Battery | 12 V, 4000 mAh rechargeable nickel-metal hydride (NiMH), per v9.33 manufacturer manual |
| Published Battery Runtime — 1 Pump Module | Approximately 6 hours with one Pump Module infusing at 25 mL/hr using a new, fully charged battery |
| Published Battery Runtime — 4 Pump Modules | Approximately 3 hours with four Pump Modules infusing at 25 mL/hr using a new, fully charged battery |
| High-Load Published Runtime | Approximately 1 hour with four Pump Modules infusing at 999 mL/hr plus one Auto-ID Module |
| Battery Recharge | Approximately 16 hours for a depleted battery, per manufacturer instructions |
| Battery Runtime Note | Runtime varies with number and type of modules, module activity, battery condition, and configuration |
| Communication Data Port | RS-232 with RJ45 connector |
| Module Interface | Left and right Inter-Unit Interface (IUI) connectors |
| Wireless Connectivity | Supported when compatible wireless-network hardware is installed and properly configured |
| Electronic Memory | Compact flash storage for system software and Data Set information plus onboard nonvolatile flash memory for logs and related system data |
| Fluid Ingress Protection | IPX2 — drip proof |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Operating Relative Humidity | 20% to 90% noncondensing |
| Operating Orientation | Manufacturer specifies that the Alaris System remain upright during operation |
| Seller Warranty | 1-Year Warranty |
| Rental Options | Short- and long-term options available; final configuration and terms confirmed by quote |
The exact software version installed on the rental PC Unit should be verified before selecting version-specific instructions. BD's current PC Unit product page and official Software v9.33 Model 8015 manual are provided below, together with current FDA PCU safety records.
At United Infusion, we follow a comprehensive refurbishing process for infusion pumps to help ensure they operate safely and reliably. This process follows manufacturer guidelines and sanitation standards to meet high quality expectations.
Below are the key steps of our refurbishing process:
Each pump is examined for external damage, cracks, and signs of wear on the body and components. Cosmetic issues and potential safety concerns are noted for further action.
The pump is carefully disassembled to access internal components, including the motor, gears, tubing pathways, and electronics. All parts are handled with care to avoid added damage.
Appropriate disinfectants are used to thoroughly clean all parts and remove residual fluids, blood, or debris. This step follows sanitation standards to help ensure the device is free from contaminants.
Individual parts, including the motor, battery, display screen, buttons, and connectors, are inspected for wear, damage, or malfunction. Worn or damaged components are replaced with manufacturer-approved parts.
The pump is adjusted to support accurate fluid delivery rates using standardized testing methods, and calibration is verified against manufacturer specifications. The latest compatible software version is then installed to improve functionality.
The pump goes through functional testing, including alarms, flow rate accuracy, occlusion detection, and bolus delivery. It is then reassembled, connections are checked, and a final visual and functional inspection is completed to confirm it meets safety standards and customer requirements.
"We needed our syringe pumps serviced for scheduled maintenance to continue to provide safe care. In the past, we had to send them off with a 6 weeks turn around time. Then we found United Infusion. 30 min down the road, 24 hr turn around and 30 minutes down the road. We are extremely grateful!!!"
United Infusion supports equipment sales, repair, and rentals. Our team can help match the right unit, answer product questions, and support your equipment needs.