1. Visual Inspection
Each pump is examined for external damage, cracks, and signs of wear on the body and components. Cosmetic issues and potential safety concerns are noted for further action.
Refurbished Ohmeda Panda Infant Warmer
In stock
$2,295.00
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Radiant infant warmer for controlled thermal support with open patient access
- Refurbished • United Infusion SKU 3300
- Exact manufacturer model and configuration should be verified on the unit data plate
Refurbished Ohmeda Panda Infant Warmer
Refurbished • 1-Year Warranty Included • Datex-Ohmeda • United Infusion SKU 3300
The Ohmeda Panda Infant Warmer is a radiant warming system designed to provide controlled thermal support while maintaining open access to the infant. United Infusion lists this refurbished unit under SKU 3300.
What’s Included
- 1× refurbished Ohmeda Panda Infant Warmer
Configuration note: The current United Infusion listing does not identify the exact manufacturer model or confirm the included mattress, skin-temperature probe, scale, drawers, shelves, gas accessories, resuscitation equipment, or other optional components. Confirm the unit data plate and included accessories before ordering.
Product Description
Ohmeda infant radiant warmers provide a controlled source of radiant heat for infant patients while allowing clinicians open access during care. Historical Ohmeda Infant Warmer System documentation describes microprocessor-controlled manual heater-power and servo skin-temperature-control modes across the applicable warmer family.
The exact configuration matters when identifying a legacy Ohmeda warmer. Historical manufacturer documentation identifies the Model 3300 and Model 3400 as separate configurations. Both use integral infant beds, while the Model 3400 adds an elevating pedestal for adjustment of bed-to-floor height.
- Radiant thermal support with open access to the infant
- Microprocessor-based warmer family with manual and servo control documented by Ohmeda
- United Infusion seller SKU 3300
- Seller-listed brand: Datex-Ohmeda
- Refurbished by United Infusion
- 1-year warranty included
Model verification: United Infusion currently uses SKU 3300, but the live product record does not separately identify the manufacturer model. Do not use the SKU alone to determine whether the unit is an Ohmeda Model 3300, Model 3400, or another Panda configuration. Verify the manufacturer model, serial number, electrical rating, heater configuration, and data plate before applying model-specific dimensions, power requirements, heater output, or service procedures.
Specifications — Ohmeda Panda Infant Warmer
| Product Type | Radiant infant warmer |
| Seller-Listed Brand | Datex-Ohmeda |
| United Infusion SKU | 3300 |
| Exact Manufacturer Model | Not confirmed on the current United Infusion listing; verify unit data plate |
| Thermal Control | Manual heater-power and servo skin-temperature control are documented for applicable Ohmeda Infant Warmer System configurations; verify exact unit |
| Legacy 3300 / 3400 Bed Configuration | Historical Ohmeda documentation identifies both models with integral infant beds |
| Elevating Pedestal | Model-dependent; historical Ohmeda documentation identifies the Model 3400 as the elevating configuration |
| Dimensions | Model-dependent; verify exact manufacturer model before use |
| Electrical Requirements | Model, voltage, and production-revision dependent; verify unit rating plate |
| Heater Output | Configuration and serial-number dependent; verify exact unit before use |
| Optional Equipment | Scale, drawers, shelves, gas accessories, probes, resuscitation equipment, and other options vary by configuration |
| Condition | Refurbished |
| Warranty | 1-Year Warranty Included |
Product Documentation
Verify the exact manufacturer model and serial number before selecting operating or service documentation. The historical Ohmeda service manual below covers several Infant Warmer System models, including the 3300 and 3400, and must not be treated as confirmation of this unit's exact model.
In stock
$2,295.00
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Radiant infant warmer for controlled thermal support with open patient access
- Refurbished • United Infusion SKU 3300
- Exact manufacturer model and configuration should be verified on the unit data plate
Refurbished Ohmeda Panda Infant Warmer
Refurbished • 1-Year Warranty Included • Datex-Ohmeda • United Infusion SKU 3300
The Ohmeda Panda Infant Warmer is a radiant warming system designed to provide controlled thermal support while maintaining open access to the infant. United Infusion lists this refurbished unit under SKU 3300.
What’s Included
- 1× refurbished Ohmeda Panda Infant Warmer
Configuration note: The current United Infusion listing does not identify the exact manufacturer model or confirm the included mattress, skin-temperature probe, scale, drawers, shelves, gas accessories, resuscitation equipment, or other optional components. Confirm the unit data plate and included accessories before ordering.
Product Description
Ohmeda infant radiant warmers provide a controlled source of radiant heat for infant patients while allowing clinicians open access during care. Historical Ohmeda Infant Warmer System documentation describes microprocessor-controlled manual heater-power and servo skin-temperature-control modes across the applicable warmer family.
The exact configuration matters when identifying a legacy Ohmeda warmer. Historical manufacturer documentation identifies the Model 3300 and Model 3400 as separate configurations. Both use integral infant beds, while the Model 3400 adds an elevating pedestal for adjustment of bed-to-floor height.
- Radiant thermal support with open access to the infant
- Microprocessor-based warmer family with manual and servo control documented by Ohmeda
- United Infusion seller SKU 3300
- Seller-listed brand: Datex-Ohmeda
- Refurbished by United Infusion
- 1-year warranty included
Model verification: United Infusion currently uses SKU 3300, but the live product record does not separately identify the manufacturer model. Do not use the SKU alone to determine whether the unit is an Ohmeda Model 3300, Model 3400, or another Panda configuration. Verify the manufacturer model, serial number, electrical rating, heater configuration, and data plate before applying model-specific dimensions, power requirements, heater output, or service procedures.
Specifications — Ohmeda Panda Infant Warmer
| Product Type | Radiant infant warmer |
| Seller-Listed Brand | Datex-Ohmeda |
| United Infusion SKU | 3300 |
| Exact Manufacturer Model | Not confirmed on the current United Infusion listing; verify unit data plate |
| Thermal Control | Manual heater-power and servo skin-temperature control are documented for applicable Ohmeda Infant Warmer System configurations; verify exact unit |
| Legacy 3300 / 3400 Bed Configuration | Historical Ohmeda documentation identifies both models with integral infant beds |
| Elevating Pedestal | Model-dependent; historical Ohmeda documentation identifies the Model 3400 as the elevating configuration |
| Dimensions | Model-dependent; verify exact manufacturer model before use |
| Electrical Requirements | Model, voltage, and production-revision dependent; verify unit rating plate |
| Heater Output | Configuration and serial-number dependent; verify exact unit before use |
| Optional Equipment | Scale, drawers, shelves, gas accessories, probes, resuscitation equipment, and other options vary by configuration |
| Condition | Refurbished |
| Warranty | 1-Year Warranty Included |
Product Documentation
Verify the exact manufacturer model and serial number before selecting operating or service documentation. The historical Ohmeda service manual below covers several Infant Warmer System models, including the 3300 and 3400, and must not be treated as confirmation of this unit's exact model.
- Radiant infant warmer for controlled thermal support with open patient access
- Refurbished • United Infusion SKU 3300
- Exact manufacturer model and configuration should be verified on the unit data plate
Refurbished Ohmeda Panda Infant Warmer
Refurbished • 1-Year Warranty Included • Datex-Ohmeda • United Infusion SKU 3300
The Ohmeda Panda Infant Warmer is a radiant warming system designed to provide controlled thermal support while maintaining open access to the infant. United Infusion lists this refurbished unit under SKU 3300.
What’s Included
- 1× refurbished Ohmeda Panda Infant Warmer
Configuration note: The current United Infusion listing does not identify the exact manufacturer model or confirm the included mattress, skin-temperature probe, scale, drawers, shelves, gas accessories, resuscitation equipment, or other optional components. Confirm the unit data plate and included accessories before ordering.
Product Description
Ohmeda infant radiant warmers provide a controlled source of radiant heat for infant patients while allowing clinicians open access during care. Historical Ohmeda Infant Warmer System documentation describes microprocessor-controlled manual heater-power and servo skin-temperature-control modes across the applicable warmer family.
The exact configuration matters when identifying a legacy Ohmeda warmer. Historical manufacturer documentation identifies the Model 3300 and Model 3400 as separate configurations. Both use integral infant beds, while the Model 3400 adds an elevating pedestal for adjustment of bed-to-floor height.
- Radiant thermal support with open access to the infant
- Microprocessor-based warmer family with manual and servo control documented by Ohmeda
- United Infusion seller SKU 3300
- Seller-listed brand: Datex-Ohmeda
- Refurbished by United Infusion
- 1-year warranty included
Model verification: United Infusion currently uses SKU 3300, but the live product record does not separately identify the manufacturer model. Do not use the SKU alone to determine whether the unit is an Ohmeda Model 3300, Model 3400, or another Panda configuration. Verify the manufacturer model, serial number, electrical rating, heater configuration, and data plate before applying model-specific dimensions, power requirements, heater output, or service procedures.
Specifications — Ohmeda Panda Infant Warmer
| Product Type | Radiant infant warmer |
| Seller-Listed Brand | Datex-Ohmeda |
| United Infusion SKU | 3300 |
| Exact Manufacturer Model | Not confirmed on the current United Infusion listing; verify unit data plate |
| Thermal Control | Manual heater-power and servo skin-temperature control are documented for applicable Ohmeda Infant Warmer System configurations; verify exact unit |
| Legacy 3300 / 3400 Bed Configuration | Historical Ohmeda documentation identifies both models with integral infant beds |
| Elevating Pedestal | Model-dependent; historical Ohmeda documentation identifies the Model 3400 as the elevating configuration |
| Dimensions | Model-dependent; verify exact manufacturer model before use |
| Electrical Requirements | Model, voltage, and production-revision dependent; verify unit rating plate |
| Heater Output | Configuration and serial-number dependent; verify exact unit before use |
| Optional Equipment | Scale, drawers, shelves, gas accessories, probes, resuscitation equipment, and other options vary by configuration |
| Condition | Refurbished |
| Warranty | 1-Year Warranty Included |
Product Documentation
Verify the exact manufacturer model and serial number before selecting operating or service documentation. The historical Ohmeda service manual below covers several Infant Warmer System models, including the 3300 and 3400, and must not be treated as confirmation of this unit's exact model.
Refurbishing Process
At United Infusion, we follow a comprehensive refurbishing process for infusion pumps to help ensure they operate safely and reliably. This process follows manufacturer guidelines and sanitation standards to meet high quality expectations.
Below are the key steps of our refurbishing process:
2. Disassembly
The pump is carefully disassembled to access internal components, including the motor, gears, tubing pathways, and electronics. All parts are handled with care to avoid added damage.
3. Cleaning & Sanitization
Appropriate disinfectants are used to thoroughly clean all parts and remove residual fluids, blood, or debris. This step follows sanitation standards to help ensure the device is free from contaminants.
4. Component Inspection & Replacement
Individual parts, including the motor, battery, display screen, buttons, and connectors, are inspected for wear, damage, or malfunction. Worn or damaged components are replaced with manufacturer-approved parts.
5. Calibration & Software Update
The pump is adjusted to support accurate fluid delivery rates using standardized testing methods, and calibration is verified against manufacturer specifications. The latest compatible software version is then installed to improve functionality.
6. Testing, Reassembly & Final Check
The pump goes through functional testing, including alarms, flow rate accuracy, occlusion detection, and bolus delivery. It is then reassembled, connections are checked, and a final visual and functional inspection is completed to confirm it meets safety standards and customer requirements.
"We needed our syringe pumps serviced for scheduled maintenance to continue to provide safe care. In the past, we had to send them off with a 6 weeks turn around time. Then we found United Infusion. 30 min down the road, 24 hr turn around and 30 minutes down the road. We are extremely grateful!!!"
Need a quote, service help, or a similar model?
United Infusion supports equipment sales, repair, and rentals. Our team can help match the right unit, answer product questions, and support your equipment needs.