1. Visual Inspection
Each pump is examined for external damage, cracks, and signs of wear on the body and components. Cosmetic issues and potential safety concerns are noted for further action.
Refurbished Hillrom Versacare-SM Hospital Bed with foam mattress
In stock
$2,450.00
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Published VersaCare capacity: 500 lb patient limit • 550 lb safe working load
- LowChair® positioning • FlexAfoot™ adjustable length • seller-confirmed 3-level Bed Exit alarm
- Refurbished • Foam mattress included • 1-Year Warranty Included
Refurbished Hillrom VersaCare-SM Hospital Bed with Foam Mattress
Refurbished • Foam Mattress Included • 1-Year Warranty Included • United Infusion SKU MFI HRM P3200
The Hillrom VersaCare® Hospital Bed is an electrically adjustable med-surg bed designed to support patient positioning, mobility, and caregiver access in medical-surgical and higher-acuity healthcare environments. United Infusion's current listing includes a foam mattress and identifies the bed under seller SKU MFI HRM P3200.
What’s Included
- 1× refurbished Hillrom VersaCare Hospital Bed
- 1× foam mattress / support surface — exact manufacturer and model not specified on the current United Infusion listing
Configuration note: The included foam mattress should not be represented as an AccuMax®, NP100, P500, VersaCare A.I.R.®, or other named Hillrom surface unless the exact mattress label is verified. Scale, SafeView® Alerts, SideCom®, nurse call, IntelliDrive®, HandsFree® controls, and other optional or revision-dependent systems should also be verified on the physical bed.
Product Description
The VersaCare platform provides powered adjustment of bed height and patient-support sections, together with Trendelenburg and reverse Trendelenburg positioning. Hillrom documentation also describes the LowChair® position, which places the patient in an upright position while maintaining a low bed height.
The FlexAfoot™ mechanism allows documented VersaCare configurations to shorten or extend the foot section and sleep surface by approximately 11 inches. The bed also uses a four-wheel braking system and includes backup-battery operation in published manufacturer specifications.
United Infusion specifically identifies a 3-Level Bed Exit Alarm on this listing. Hillrom documentation describes three Bed Exit monitoring modes: Patient Position, Exiting, and Out-of-Bed. Other monitoring, communication, scale, alert, and transport features remain configuration-dependent unless confirmed on the exact refurbished bed.
- Powered bed-height and patient-position adjustments
- Trendelenburg and reverse Trendelenburg positioning
- LowChair® positioning
- FlexAfoot™ adjustable bed and sleep-surface length
- Seller-confirmed 3-level Bed Exit alarm
- Four-wheel braking system
- Backup-battery operation documented by Hillrom
- Head-of-bed and Trendelenburg angle indicators
- Patient and caregiver siderail controls documented for VersaCare configurations
Model and revision note: United Infusion's seller SKU references P3200, but the exact Hill-Rom manufacturer model, letter revision, serial number, and installed configuration should be verified on the physical bed. Hill-Rom documentation covers multiple P3200/P3201 revisions, and some specifications and available features differ by generation.
Mattress note: United Infusion confirms a foam mattress with this listing but does not currently identify its manufacturer, product name, material construction, weight limit, or clinical performance characteristics. Surface-specific pressure redistribution, microclimate, low-air-loss, or therapy claims should not be applied unless the exact included mattress is identified.
Specifications — Hillrom VersaCare Hospital Bed
| Manufacturer | Hill-Rom, Inc. |
| Product Family | VersaCare® Hospital / Med-Surg Bed |
| United Infusion SKU | MFI HRM P3200 |
| Manufacturer Model / Revision | Seller SKU references P3200; verify exact manufacturer model, letter revision, and serial number on the bed label |
| Included Surface | Foam mattress included; exact manufacturer/model not specified by United Infusion |
| Published Patient Weight Limit | 500 lb (227 kg) for documented VersaCare configurations |
| Published Safe Working Load | 550 lb (250 kg), including patient and accessories, per Hill-Rom specification |
| Sleep Surface Width | 35.5 in (90.2 cm) |
| Sleep Surface Length | 75 in (191 cm) retracted • 86 in (218 cm) fully extended |
| Overall Width | 37 in (94 cm) with siderails stowed • 40 in (102 cm) with siderails up |
| Overall Length | 82.5 in (210 cm) fully retracted • 94.5 in (240 cm) fully extended |
| Standard Low Bed Height | 13 in (33 cm) floor to center of deck • 17 in (43.2 cm) floor to edge of deck |
| Standard High Bed Height | 30 in (76.2 cm) floor to center of deck • 34 in (86.4 cm) floor to edge of deck |
| IntelliDrive® Height Note | Optional IntelliDrive-equipped configurations can have different published bed heights; verify exact unit |
| Head Section | Revision-dependent: current 2024 Baxter rental literature lists 0° to 60°; an earlier 2014 Hill-Rom specification lists 0° to 65°. Verify exact bed revision. |
| Knee Section | 0° to 16° |
| Foot Section | 0° to -27° |
| Trendelenburg / Reverse Trendelenburg | Maximum 15° / 10° |
| Standard Caster Diameter | 5 in (12.7 cm); earlier Hill-Rom documentation lists 6 in casters with optional IntelliDrive transport |
| Braking System | Four-wheel braking; brakes lock rolling and swiveling |
| Bed Exit System | 3-level system confirmed by United Infusion; Hillrom documents Patient Position, Exiting, and Out-of-Bed modes |
| FlexAfoot™ | Manufacturer documentation describes up to approximately 11 in (28 cm) of bed/surface length adjustment |
| Backup Battery | Manufacturer-documented backup-battery operation |
| Scale System | Available on documented VersaCare configurations; exact United Infusion unit configuration should be verified |
| IntelliDrive®, SideCom®, SafeView® & Other Systems | Configuration/revision dependent unless specifically confirmed on the physical bed |
| Condition | Refurbished |
| Seller Warranty | 1-Year Warranty Included |
Product Documentation
VersaCare documentation varies by model letter and production revision. Verify the bed's complete manufacturer model and serial number before selecting revision-specific operating or service procedures.
In stock
$2,450.00
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Published VersaCare capacity: 500 lb patient limit • 550 lb safe working load
- LowChair® positioning • FlexAfoot™ adjustable length • seller-confirmed 3-level Bed Exit alarm
- Refurbished • Foam mattress included • 1-Year Warranty Included
Refurbished Hillrom VersaCare-SM Hospital Bed with Foam Mattress
Refurbished • Foam Mattress Included • 1-Year Warranty Included • United Infusion SKU MFI HRM P3200
The Hillrom VersaCare® Hospital Bed is an electrically adjustable med-surg bed designed to support patient positioning, mobility, and caregiver access in medical-surgical and higher-acuity healthcare environments. United Infusion's current listing includes a foam mattress and identifies the bed under seller SKU MFI HRM P3200.
What’s Included
- 1× refurbished Hillrom VersaCare Hospital Bed
- 1× foam mattress / support surface — exact manufacturer and model not specified on the current United Infusion listing
Configuration note: The included foam mattress should not be represented as an AccuMax®, NP100, P500, VersaCare A.I.R.®, or other named Hillrom surface unless the exact mattress label is verified. Scale, SafeView® Alerts, SideCom®, nurse call, IntelliDrive®, HandsFree® controls, and other optional or revision-dependent systems should also be verified on the physical bed.
Product Description
The VersaCare platform provides powered adjustment of bed height and patient-support sections, together with Trendelenburg and reverse Trendelenburg positioning. Hillrom documentation also describes the LowChair® position, which places the patient in an upright position while maintaining a low bed height.
The FlexAfoot™ mechanism allows documented VersaCare configurations to shorten or extend the foot section and sleep surface by approximately 11 inches. The bed also uses a four-wheel braking system and includes backup-battery operation in published manufacturer specifications.
United Infusion specifically identifies a 3-Level Bed Exit Alarm on this listing. Hillrom documentation describes three Bed Exit monitoring modes: Patient Position, Exiting, and Out-of-Bed. Other monitoring, communication, scale, alert, and transport features remain configuration-dependent unless confirmed on the exact refurbished bed.
- Powered bed-height and patient-position adjustments
- Trendelenburg and reverse Trendelenburg positioning
- LowChair® positioning
- FlexAfoot™ adjustable bed and sleep-surface length
- Seller-confirmed 3-level Bed Exit alarm
- Four-wheel braking system
- Backup-battery operation documented by Hillrom
- Head-of-bed and Trendelenburg angle indicators
- Patient and caregiver siderail controls documented for VersaCare configurations
Model and revision note: United Infusion's seller SKU references P3200, but the exact Hill-Rom manufacturer model, letter revision, serial number, and installed configuration should be verified on the physical bed. Hill-Rom documentation covers multiple P3200/P3201 revisions, and some specifications and available features differ by generation.
Mattress note: United Infusion confirms a foam mattress with this listing but does not currently identify its manufacturer, product name, material construction, weight limit, or clinical performance characteristics. Surface-specific pressure redistribution, microclimate, low-air-loss, or therapy claims should not be applied unless the exact included mattress is identified.
Specifications — Hillrom VersaCare Hospital Bed
| Manufacturer | Hill-Rom, Inc. |
| Product Family | VersaCare® Hospital / Med-Surg Bed |
| United Infusion SKU | MFI HRM P3200 |
| Manufacturer Model / Revision | Seller SKU references P3200; verify exact manufacturer model, letter revision, and serial number on the bed label |
| Included Surface | Foam mattress included; exact manufacturer/model not specified by United Infusion |
| Published Patient Weight Limit | 500 lb (227 kg) for documented VersaCare configurations |
| Published Safe Working Load | 550 lb (250 kg), including patient and accessories, per Hill-Rom specification |
| Sleep Surface Width | 35.5 in (90.2 cm) |
| Sleep Surface Length | 75 in (191 cm) retracted • 86 in (218 cm) fully extended |
| Overall Width | 37 in (94 cm) with siderails stowed • 40 in (102 cm) with siderails up |
| Overall Length | 82.5 in (210 cm) fully retracted • 94.5 in (240 cm) fully extended |
| Standard Low Bed Height | 13 in (33 cm) floor to center of deck • 17 in (43.2 cm) floor to edge of deck |
| Standard High Bed Height | 30 in (76.2 cm) floor to center of deck • 34 in (86.4 cm) floor to edge of deck |
| IntelliDrive® Height Note | Optional IntelliDrive-equipped configurations can have different published bed heights; verify exact unit |
| Head Section | Revision-dependent: current 2024 Baxter rental literature lists 0° to 60°; an earlier 2014 Hill-Rom specification lists 0° to 65°. Verify exact bed revision. |
| Knee Section | 0° to 16° |
| Foot Section | 0° to -27° |
| Trendelenburg / Reverse Trendelenburg | Maximum 15° / 10° |
| Standard Caster Diameter | 5 in (12.7 cm); earlier Hill-Rom documentation lists 6 in casters with optional IntelliDrive transport |
| Braking System | Four-wheel braking; brakes lock rolling and swiveling |
| Bed Exit System | 3-level system confirmed by United Infusion; Hillrom documents Patient Position, Exiting, and Out-of-Bed modes |
| FlexAfoot™ | Manufacturer documentation describes up to approximately 11 in (28 cm) of bed/surface length adjustment |
| Backup Battery | Manufacturer-documented backup-battery operation |
| Scale System | Available on documented VersaCare configurations; exact United Infusion unit configuration should be verified |
| IntelliDrive®, SideCom®, SafeView® & Other Systems | Configuration/revision dependent unless specifically confirmed on the physical bed |
| Condition | Refurbished |
| Seller Warranty | 1-Year Warranty Included |
Product Documentation
VersaCare documentation varies by model letter and production revision. Verify the bed's complete manufacturer model and serial number before selecting revision-specific operating or service procedures.
- Published VersaCare capacity: 500 lb patient limit • 550 lb safe working load
- LowChair® positioning • FlexAfoot™ adjustable length • seller-confirmed 3-level Bed Exit alarm
- Refurbished • Foam mattress included • 1-Year Warranty Included
Refurbished Hillrom VersaCare-SM Hospital Bed with Foam Mattress
Refurbished • Foam Mattress Included • 1-Year Warranty Included • United Infusion SKU MFI HRM P3200
The Hillrom VersaCare® Hospital Bed is an electrically adjustable med-surg bed designed to support patient positioning, mobility, and caregiver access in medical-surgical and higher-acuity healthcare environments. United Infusion's current listing includes a foam mattress and identifies the bed under seller SKU MFI HRM P3200.
What’s Included
- 1× refurbished Hillrom VersaCare Hospital Bed
- 1× foam mattress / support surface — exact manufacturer and model not specified on the current United Infusion listing
Configuration note: The included foam mattress should not be represented as an AccuMax®, NP100, P500, VersaCare A.I.R.®, or other named Hillrom surface unless the exact mattress label is verified. Scale, SafeView® Alerts, SideCom®, nurse call, IntelliDrive®, HandsFree® controls, and other optional or revision-dependent systems should also be verified on the physical bed.
Product Description
The VersaCare platform provides powered adjustment of bed height and patient-support sections, together with Trendelenburg and reverse Trendelenburg positioning. Hillrom documentation also describes the LowChair® position, which places the patient in an upright position while maintaining a low bed height.
The FlexAfoot™ mechanism allows documented VersaCare configurations to shorten or extend the foot section and sleep surface by approximately 11 inches. The bed also uses a four-wheel braking system and includes backup-battery operation in published manufacturer specifications.
United Infusion specifically identifies a 3-Level Bed Exit Alarm on this listing. Hillrom documentation describes three Bed Exit monitoring modes: Patient Position, Exiting, and Out-of-Bed. Other monitoring, communication, scale, alert, and transport features remain configuration-dependent unless confirmed on the exact refurbished bed.
- Powered bed-height and patient-position adjustments
- Trendelenburg and reverse Trendelenburg positioning
- LowChair® positioning
- FlexAfoot™ adjustable bed and sleep-surface length
- Seller-confirmed 3-level Bed Exit alarm
- Four-wheel braking system
- Backup-battery operation documented by Hillrom
- Head-of-bed and Trendelenburg angle indicators
- Patient and caregiver siderail controls documented for VersaCare configurations
Model and revision note: United Infusion's seller SKU references P3200, but the exact Hill-Rom manufacturer model, letter revision, serial number, and installed configuration should be verified on the physical bed. Hill-Rom documentation covers multiple P3200/P3201 revisions, and some specifications and available features differ by generation.
Mattress note: United Infusion confirms a foam mattress with this listing but does not currently identify its manufacturer, product name, material construction, weight limit, or clinical performance characteristics. Surface-specific pressure redistribution, microclimate, low-air-loss, or therapy claims should not be applied unless the exact included mattress is identified.
Specifications — Hillrom VersaCare Hospital Bed
| Manufacturer | Hill-Rom, Inc. |
| Product Family | VersaCare® Hospital / Med-Surg Bed |
| United Infusion SKU | MFI HRM P3200 |
| Manufacturer Model / Revision | Seller SKU references P3200; verify exact manufacturer model, letter revision, and serial number on the bed label |
| Included Surface | Foam mattress included; exact manufacturer/model not specified by United Infusion |
| Published Patient Weight Limit | 500 lb (227 kg) for documented VersaCare configurations |
| Published Safe Working Load | 550 lb (250 kg), including patient and accessories, per Hill-Rom specification |
| Sleep Surface Width | 35.5 in (90.2 cm) |
| Sleep Surface Length | 75 in (191 cm) retracted • 86 in (218 cm) fully extended |
| Overall Width | 37 in (94 cm) with siderails stowed • 40 in (102 cm) with siderails up |
| Overall Length | 82.5 in (210 cm) fully retracted • 94.5 in (240 cm) fully extended |
| Standard Low Bed Height | 13 in (33 cm) floor to center of deck • 17 in (43.2 cm) floor to edge of deck |
| Standard High Bed Height | 30 in (76.2 cm) floor to center of deck • 34 in (86.4 cm) floor to edge of deck |
| IntelliDrive® Height Note | Optional IntelliDrive-equipped configurations can have different published bed heights; verify exact unit |
| Head Section | Revision-dependent: current 2024 Baxter rental literature lists 0° to 60°; an earlier 2014 Hill-Rom specification lists 0° to 65°. Verify exact bed revision. |
| Knee Section | 0° to 16° |
| Foot Section | 0° to -27° |
| Trendelenburg / Reverse Trendelenburg | Maximum 15° / 10° |
| Standard Caster Diameter | 5 in (12.7 cm); earlier Hill-Rom documentation lists 6 in casters with optional IntelliDrive transport |
| Braking System | Four-wheel braking; brakes lock rolling and swiveling |
| Bed Exit System | 3-level system confirmed by United Infusion; Hillrom documents Patient Position, Exiting, and Out-of-Bed modes |
| FlexAfoot™ | Manufacturer documentation describes up to approximately 11 in (28 cm) of bed/surface length adjustment |
| Backup Battery | Manufacturer-documented backup-battery operation |
| Scale System | Available on documented VersaCare configurations; exact United Infusion unit configuration should be verified |
| IntelliDrive®, SideCom®, SafeView® & Other Systems | Configuration/revision dependent unless specifically confirmed on the physical bed |
| Condition | Refurbished |
| Seller Warranty | 1-Year Warranty Included |
Product Documentation
VersaCare documentation varies by model letter and production revision. Verify the bed's complete manufacturer model and serial number before selecting revision-specific operating or service procedures.
Refurbishing Process
At United Infusion, we follow a comprehensive refurbishing process for infusion pumps to help ensure they operate safely and reliably. This process follows manufacturer guidelines and sanitation standards to meet high quality expectations.
Below are the key steps of our refurbishing process:
2. Disassembly
The pump is carefully disassembled to access internal components, including the motor, gears, tubing pathways, and electronics. All parts are handled with care to avoid added damage.
3. Cleaning & Sanitization
Appropriate disinfectants are used to thoroughly clean all parts and remove residual fluids, blood, or debris. This step follows sanitation standards to help ensure the device is free from contaminants.
4. Component Inspection & Replacement
Individual parts, including the motor, battery, display screen, buttons, and connectors, are inspected for wear, damage, or malfunction. Worn or damaged components are replaced with manufacturer-approved parts.
5. Calibration & Software Update
The pump is adjusted to support accurate fluid delivery rates using standardized testing methods, and calibration is verified against manufacturer specifications. The latest compatible software version is then installed to improve functionality.
6. Testing, Reassembly & Final Check
The pump goes through functional testing, including alarms, flow rate accuracy, occlusion detection, and bolus delivery. It is then reassembled, connections are checked, and a final visual and functional inspection is completed to confirm it meets safety standards and customer requirements.
"We needed our syringe pumps serviced for scheduled maintenance to continue to provide safe care. In the past, we had to send them off with a 6 weeks turn around time. Then we found United Infusion. 30 min down the road, 24 hr turn around and 30 minutes down the road. We are extremely grateful!!!"
Need a quote, service help, or a similar model?
United Infusion supports equipment sales, repair, and rentals. Our team can help match the right unit, answer product questions, and support your equipment needs.